技术文章您现在的位置:首页 > 技术文章 > 氮氧化物转换器产品样册-机箱式-英文版

氮氧化物转换器产品样册-机箱式-英文版

更新时间:2022-04-15   点击次数:2907次
  NOx converter
  In order to protect human health and the environment, the emission of nitrogen oxides must be reduced as much as possible. In order to use economical gas analysis methods in CEMS monitoring technology, such as NDIR non dispersive infrared technology and nduv UV technology, NO2 gas in the exhaust gas needs to be converted into NO. The conversion takes place in an electrically heated reactor filled with catalyst materials specially developed for this purpose. The NOx converter has the characteristics of high conversion rate and long service life, low power, low heating capacity and convenient maintenance.
  NOx converter has obvious advantages in similar products, high conversion efficiency, long service life and independent intellectual property rights.
  Product features
  Customized catalytic materials with low gas resistance and high efficiency Special preheating chamber design
  High density catalyst filling structure
  No organic matter volatilization and interference Professional hot runner design, simple and generous
  Application occasion
  Occasions of NO measurement in CEMS for continuous flue gas monitoring Analysis of nitrogen oxides in the atmosphere
  

 

  Technical Data
  

Product model

NOX-10

Product code

JY010B

Housing

19" rack mounting 3U

Temperature of sample gas

max.180℃,no condensate

Temperature range, adjustable

450℃

Gas flow rate

max.3LPM

Operating pressure

max.2bar abs.

Warm-up time

approx.30min

Operating temperature

350℃-420℃

Conversion N02/N0

>95%

Live of catalyst N02/N0

to renew approx. every 6 months as preventive measure

Differential pressure

<20 mbar

Ambient temperature

+10℃-50℃

Storage temperature

-25℃-65℃

Relative humidity

<80%

Sample gas connections

PVDF OD6mm or OD8mm or SS316 OD8mm

Dimension

483W*133H*276D

Power supply

230V 50HZ

Power consumption

400W

 

 

Electrical connection

Main power plug connector incl. two fine fuse 5 x 20 mm, 230V: 6,3A, 115V: 10A, 2 m cable and shock-proof plug. Alarm-/control signals 9-pin sub D connector

Status signals for temperature

NO contact-potential free, contact rating max. 24V, 1A

Materials of sample contacting parts

316SS,PVDF

Degree of protection

IP 20 EN60529

Weight

6.2kg

Electrical equipment standard

EN 61010

  Appearance dimension
  19 inch chassis type:
  Unit mm
  

 

勇前科技(杭州)有限公司

勇前科技(杭州)有限公司

地址:杭州滨江江虹南路256号  电话:17354741415

© 2024 版权所有:勇前科技(杭州)有限公司  备案号:浙ICP备20012322号-1  总访问量:67449  站点地图  技术支持:化工仪器网  管理登陆